
HIK 4MP IP IR PTZ 2.8MM DS-2DE2C400MW-DE(F0)(S7)
Overview
The Hikvision DSâ2DE2C400MWâDE(S7) is a compact, valueâseries PTZ speedâdome that delivers reliable 4MP imagery and strong lowâlight performance. This listing covers the 2.8âŻmm fixedâlens variant only. The camera combines DarkFighter lowâlight sensitivity with dual lighting (whiteâlight supplement and IR), onboard audio support and a weatherâresistant housing â a practical choice for schools, small estates, retail façades and light commercial sites.
Benefits
- Highâresolution 4MP sensor provides clear images for identification and evidence capture.
- DarkFighter technology improves lowâlight colour performance before IR is required.
- Dualâlighting lets you choose colour night footage with white light or blackâandâwhite IR imaging as conditions demand.
- Compact PTZ mechanics give flexible coverage with fewer devices required on site.
- Onâboard microSD support enables local edge recording for redundancy when network storage is unavailable.
Technical specifications â 2.8 mm variant
- Sensor / Resolution: 4MP (2560 Ă 1440)
- Lens: 2.8 mm fixed
- Field of view (approx.): Horizontal â 97°; Vertical â 52.3°; Diagonal â 114.3°
- Minimum illumination: Colour 0.005 Lux @ F1.2 (AGC on)
- Supplement lighting: Whiteâlight and IR; effective range up to ~30 m (model dependent)
- Pan / Tilt: Pan 0°â340°; Tilt â5° to +105°
- Video compression: H.265 / H.264 (MJPEG support may vary by firmware)
- Onâboard storage: microSD / SDHC / SDXC up to 256 GB
- Audio: Builtâin microphone (speaker supported in some variants)
- Network & interfaces: 10/100 Mbps Ethernet; ONVIF compatible
- Power: 12 V DC or PoE (IEEE 802.3af). Typical power consumption ~9â10 W (varies with lighting mode)
- Environmental: IP66 ingress protection; operating temperature approx. â30 °C to +50 °C
- Dimensions & weight: Refer to official datasheet for exact figures (verify for installation planning)
Recommended applications
- School and university perimeters, entrances and outdoor walkways
- Small commercial yards, shopfronts and loading bays
- Residential estates where wide situational awareness and lowâlight colour are important
- Sites requiring local edge recording for redundancy
Installation notes
- Mount at a height and angle that allows the 2.8âŻmm field of view to cover the intended area â this wide lens offers broad coverage but reduced longârange magnification.
- When using whiteâlight supplement, consider the effect on neighbouring properties and avoid aiming directly at public footpaths or windows to reduce glare.
- Prefer PoE where available for simpler cabling; if using 12âŻV DC, check cable run and voltage drop in hot climates.
- Secure the camera on a dedicated VLAN and enable HTTPS / change default credentials to protect network access.
- Update camera firmware during commissioning and test both whiteâlight and IR modes under real night conditions.
- Use weatherproof junctions and seal external cable entries to prevent moisture ingress over time.
Whatâs in the boxÂ
- DSâ2DE2C400MWâDE(S7) camera (2.8 mm variant)
- Quick start guide and warranty card
- Mounting template and basic fixings (verify supplied accessories prior to installation)
Overview
The Hikvision DSâ2DE2C400MWâDE(S7) is a compact, valueâseries PTZ speedâdome that delivers reliable 4MP imagery and strong lowâlight performance. This listing covers the 2.8âŻmm fixedâlens variant only. The camera combines DarkFighter lowâlight sensitivity with dual lighting (whiteâlight supplement and IR), onboard audio support and a weatherâresistant housing â a practical choice for schools, small estates, retail façades and light commercial sites.
Benefits
- Highâresolution 4MP sensor provides clear images for identification and evidence capture.
- DarkFighter technology improves lowâlight colour performance before IR is required.
- Dualâlighting lets you choose colour night footage with white light or blackâandâwhite IR imaging as conditions demand.
- Compact PTZ mechanics give flexible coverage with fewer devices required on site.
- Onâboard microSD support enables local edge recording for redundancy when network storage is unavailable.
Technical specifications â 2.8 mm variant
- Sensor / Resolution: 4MP (2560 Ă 1440)
- Lens: 2.8 mm fixed
- Field of view (approx.): Horizontal â 97°; Vertical â 52.3°; Diagonal â 114.3°
- Minimum illumination: Colour 0.005 Lux @ F1.2 (AGC on)
- Supplement lighting: Whiteâlight and IR; effective range up to ~30 m (model dependent)
- Pan / Tilt: Pan 0°â340°; Tilt â5° to +105°
- Video compression: H.265 / H.264 (MJPEG support may vary by firmware)
- Onâboard storage: microSD / SDHC / SDXC up to 256 GB
- Audio: Builtâin microphone (speaker supported in some variants)
- Network & interfaces: 10/100 Mbps Ethernet; ONVIF compatible
- Power: 12 V DC or PoE (IEEE 802.3af). Typical power consumption ~9â10 W (varies with lighting mode)
- Environmental: IP66 ingress protection; operating temperature approx. â30 °C to +50 °C
- Dimensions & weight: Refer to official datasheet for exact figures (verify for installation planning)
Recommended applications
- School and university perimeters, entrances and outdoor walkways
- Small commercial yards, shopfronts and loading bays
- Residential estates where wide situational awareness and lowâlight colour are important
- Sites requiring local edge recording for redundancy
Installation notes
- Mount at a height and angle that allows the 2.8âŻmm field of view to cover the intended area â this wide lens offers broad coverage but reduced longârange magnification.
- When using whiteâlight supplement, consider the effect on neighbouring properties and avoid aiming directly at public footpaths or windows to reduce glare.
- Prefer PoE where available for simpler cabling; if using 12âŻV DC, check cable run and voltage drop in hot climates.
- Secure the camera on a dedicated VLAN and enable HTTPS / change default credentials to protect network access.
- Update camera firmware during commissioning and test both whiteâlight and IR modes under real night conditions.
- Use weatherproof junctions and seal external cable entries to prevent moisture ingress over time.
Whatâs in the boxÂ
- DSâ2DE2C400MWâDE(S7) camera (2.8 mm variant)
- Quick start guide and warranty card
- Mounting template and basic fixings (verify supplied accessories prior to installation)
Original: $139.58
-70%$139.58
$41.87Description
Overview
The Hikvision DSâ2DE2C400MWâDE(S7) is a compact, valueâseries PTZ speedâdome that delivers reliable 4MP imagery and strong lowâlight performance. This listing covers the 2.8âŻmm fixedâlens variant only. The camera combines DarkFighter lowâlight sensitivity with dual lighting (whiteâlight supplement and IR), onboard audio support and a weatherâresistant housing â a practical choice for schools, small estates, retail façades and light commercial sites.
Benefits
- Highâresolution 4MP sensor provides clear images for identification and evidence capture.
- DarkFighter technology improves lowâlight colour performance before IR is required.
- Dualâlighting lets you choose colour night footage with white light or blackâandâwhite IR imaging as conditions demand.
- Compact PTZ mechanics give flexible coverage with fewer devices required on site.
- Onâboard microSD support enables local edge recording for redundancy when network storage is unavailable.
Technical specifications â 2.8 mm variant
- Sensor / Resolution: 4MP (2560 Ă 1440)
- Lens: 2.8 mm fixed
- Field of view (approx.): Horizontal â 97°; Vertical â 52.3°; Diagonal â 114.3°
- Minimum illumination: Colour 0.005 Lux @ F1.2 (AGC on)
- Supplement lighting: Whiteâlight and IR; effective range up to ~30 m (model dependent)
- Pan / Tilt: Pan 0°â340°; Tilt â5° to +105°
- Video compression: H.265 / H.264 (MJPEG support may vary by firmware)
- Onâboard storage: microSD / SDHC / SDXC up to 256 GB
- Audio: Builtâin microphone (speaker supported in some variants)
- Network & interfaces: 10/100 Mbps Ethernet; ONVIF compatible
- Power: 12 V DC or PoE (IEEE 802.3af). Typical power consumption ~9â10 W (varies with lighting mode)
- Environmental: IP66 ingress protection; operating temperature approx. â30 °C to +50 °C
- Dimensions & weight: Refer to official datasheet for exact figures (verify for installation planning)
Recommended applications
- School and university perimeters, entrances and outdoor walkways
- Small commercial yards, shopfronts and loading bays
- Residential estates where wide situational awareness and lowâlight colour are important
- Sites requiring local edge recording for redundancy
Installation notes
- Mount at a height and angle that allows the 2.8âŻmm field of view to cover the intended area â this wide lens offers broad coverage but reduced longârange magnification.
- When using whiteâlight supplement, consider the effect on neighbouring properties and avoid aiming directly at public footpaths or windows to reduce glare.
- Prefer PoE where available for simpler cabling; if using 12âŻV DC, check cable run and voltage drop in hot climates.
- Secure the camera on a dedicated VLAN and enable HTTPS / change default credentials to protect network access.
- Update camera firmware during commissioning and test both whiteâlight and IR modes under real night conditions.
- Use weatherproof junctions and seal external cable entries to prevent moisture ingress over time.
Whatâs in the boxÂ
- DSâ2DE2C400MWâDE(S7) camera (2.8 mm variant)
- Quick start guide and warranty card
- Mounting template and basic fixings (verify supplied accessories prior to installation)



















